Wednesday, August 25, 2010

AMD’s Bulldozer vs Intel's Hyper-Threading?


AMD's so called Strong Thread approach in the Bulldozer module is that really compelling?

Extra cores are added when a processor can't operate at a faster clock speed, that's a good and easy way to expand a product line with effectively faster products, even though it may NOT be any faster depending on whether the applications are taking advantage of the multiple cores. But fully duplicating x86 core is expensive to scale up.

Intel hyper-threading is a good idea in certain cases, with only little more hardware it allows multiple threads to share the functional units in a core with lower context switch overhead, tolerating memory latency as memory latency is relatively high. That works well with
  • Complementing threads - Threads do not use the same types of functional units such as the integer units, floating units, etc. thus maximizing the hardware utilization. Or threads do not have conflicting memory accesses, especially long latency memory accesses.
  • Threads play nice with cache - A thread does not result in spilling out the data of another thread from the cache. Unfortunately, this would be difficult to ensure in practice as the dynamic OS thread scheduling, memory access pattern, etc. contribute to the cache usage.
On the other hand, AMD's Strong Thread includes two sets of integer units and L1 data cache in a Bulldozer module, which is heavier than the hyper-threading approach, but more lightweight than fully duplicating a x86 core. That effectively allowing a thread to enjoy full private L1 data cache during its execution quantum, while hyper-threading works in a shared L1 cache like environment. Whether the module supports cpu affinity i.e. binding a thread to a particular core of the chip, is something we should be looking for when more details are available.

Hyper-threading vs Bulldozer may provoke the argument of shared cache vs private cache: A thread can potentially access the entire shared cache, while a thread enjoys full bandwidth in accesses to the private cache. The downside is a thread is limited to the smaller private cache size even if the other private cache in the module is under utilized. To argue that further: a larger shared cache would have higher latency due to larger storage management overhead, while smaller private cache would have lower latency generally. Whether shared or private cache is better for the performance, it's very specific to the memory access patterns of multiple threads.

As L1 cache is usually very small, the performance impact of smaller private L1 data cache for a single threaded application could be compensated by the larger shared L2 cache. When an application has large working-set, doubling the L1 data cache is probably insufficient to keep the working-set anyway.

We should also note that the floating-point units connect to shared L2 cache bypassing the L1 data cache. They probably have a good reason for that. I can recall that Itanium II does not use L1 data cache for their floating-point too.

Overall, the AMD Bulldozer is an interesting architecture. It has great potential to exhibit higher performance at lower cost. Its benchmark data is something we should keep an eye on.

See also:

4 comments:

  1. AMD Bulldozer is disappointing.Expected more from AMD.

    ReplyDelete
  2. i am impressed with both my bulldozer and i7 however the bulldozer seams to be better in practice

    ReplyDelete
  3. The primary bulldozer was utilized to till fields. It was outlined by James Cummings and J. Lord McLeod. It is made out of a sharp edge or edge, track and motors.jual alat berat china

    ReplyDelete
  4. For planning, consider that new PC innovation turns out almost step by step, so another PC isn't probably going to have the execution to stay aware of the most recent games for more than 2-3 years. AMD

    ReplyDelete